Solaris x86 DL380G6 front panel lights

[dhermans]

Hi,
I have Solaris 10U8 + patches + all relevant HPQ management packages.

All are working without error and I can access the iLO2 and Systems Management homepage without issue.

The front panel lights though remain unlit. Is there something I need to do to get them to light up for normal / error states?

Thanks

[Michal Kapalka (mikap)]

hi,

could you please tell mi wich led is it and the color ???

7. UID LED button
8. Health LED
9. Power On/Standby button and system power LED
12. Systems Insight Display

you oculd check the HEALT status with the ILO

mikap

[David Claypool · Accepted solution]

The Systems Insight Display on your DL380G6 needs no software to be installed on the system to operate--it's all done in hardware. The display operates on the "no news is good news" principle. No lights will be on when things are normal, only when an error condition of some sort exists.

[dhermans]

Thanks for your succinct reply - i have no lights on at the moment - which is good!

[dhermans]

refer post above - no lights is normal