Sony AIT Storage Device SATA on Proliant ML150

[Denis - Multsystems]

Hi,

I want to install an Sony AIT1 Turbo Storage Device (SDX-470V) in SATA conectors from my Proliant ML150 G3 Server, but it can´t detect on system (Post, Bios, an OS).

Is there a way to do that? All the sata conectors are plugged in the RAID device (where we can put the harddisks), but i try to remove one and plug directly in the SDX-470 but without success (can´t detect).

If someone know how to do that, please help me.

Thanks!

[James ~ Happy Dude]

Hello Dennis,

What kind of interface does this SONY AIT have ? an IDE interface or USB or IEEE ??

Regards.

[Denis - Multsystems]

Hi!

The SONY AIT has a SATA interface!

And i connect in the plug on motherboard, and the device can´t be detected!

[ISSPE · Accepted solution]

Unfortunately ML150G3 does not support SATA tape. An excel file listing all the supported tape options is attached. You might try DISABLING AHCI in BIOS setup features: F10/Advanced/Advanced Chipset Control/SATA AHCI, and then use port 5 or 6 for the tape drive. This is a long shot, since I can't try it myself to verify.

[Denis - Multsystems]

I will try, thanks for your help!