ProLiant Servers (ML,DL,SL)
1748216 Members
3497 Online
108759 Solutions
New Discussion юеВ

Re: Status from iLO Rest Doesn't Match That from hpssacli

 
SOLVED
Go to solution
mnicolazzo
Occasional Contributor

Status from iLO Rest Doesn't Match That from hpssacli

I retrieved information for a logical drive on an HP Smart Storage Array on a ProLiant DL-380 Gen9 using the iLO Rest interface and the status returned is "warning". But if I get status for the same logical drive using hpssacli, it returns "OK". Does anyone have an idea why that might be?  Also, I retrieved Ethernet card information using the Rest interface and all the interfaces returned "disabled" but two of them were definitely enabled and functioning. Why would iLO return that?

Thanks

3 REPLIES 3
Oscar A. Perez
Honored Contributor
Solution

Re: Status from iLO Rest Doesn't Match That from hpssacli

Is the HPE AMS service running on the OS?




__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
mnicolazzo
Occasional Contributor

Re: Status from iLO Rest Doesn't Match That from hpssacli

Ahh, that may be the problem. Thanks. I'll install it and see what I get.

mnicolazzo
Occasional Contributor

Re: Status from iLO Rest Doesn't Match That from hpssacli

Yup, that did the trick. Thanks again!