Stop 0x77 error on ProLiant 350 G5, Windows 2003

[John Bouley]

A new installation of Windows 2003 is receiving a stop 0x77 (oxC000000E, 0xC000000E, 0x0000000, 0x02393000)

Is this a problem with a driver or a missing service pack?

Thank you,

[Rob Buxton]

Have you tried using Smart Start to initiate the server build?
That might pick up any missing drivers.

[John Bouley]

Actually, I did use the "Smart Start" CD to do the installation.

Acording to the Microsoft KB article 130801 a code 0xC00000E is a STATUS_INVALID_HANDLE. Whatever that means...

It seems that the problems have occured during the backup process where the server uses NTBackup to backup over the network to another Windows server. Could there be some sort of load problems with the nic or Raid array?

Thanks,
John

[John Bouley]

Solved the problem with SP2. Apparently, it was a Microsoft bug that was not evident unless running Windows 2003 on this hardware. Perhaps HP should put out a discaimer...