ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Stop error 0x07 when installing W2K

Ayman Altounji
Valued Contributor

Stop error 0x07 when installing W2K

I?m upgrading a SBS4.5 installation to SBS2000. Everytime after the complete installation the system ends with the Stop error 0x07 (inaccessible_boot_device) when rebooting at the end of the installation proces.
I'm using the cpq32fs2 driver from the SmartStart 4.90 CD. It's on the SSD disks version v2.19A. Is this driver compliant with W2K or only for Windows NT 4.0??? If not, how do I get an apropriate driver? Or is something else the problem. For instance when repair
ing the W2K installation FIXMBR records some problems but doesn't fix anaything. I also start the proces with the clean installation of W2K on the fully cleaned disk.

I think I tried every possibility. So anyone who can help me?
Thanks in advance.
Ayman Altounji
Valued Contributor

Re: Stop error 0x07 when installing W2K

Sorry, stop error was 0x7B of course.