ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Storage System Fan Status Change

Gabriel Bergevin
Occasional Contributor

Storage System Fan Status Change

Hello, I get this error message when I boot the server:
Storage System Fan Status Change.
The COMPAQ PROLIANT 4L2I storage system connected to SCSI bus 1 of the controller in Slot 2 has a new status of 3.
(Fan status values: 1=other, 2=ok, 3=failed, 4=notInstalled, 5=degraded)
[SNMP TRAP: 8026 in CPQSTSYS.MIB]
I check and I don't have a fan on the controller card. I'm using the 64-bit/133MHz dual channel ultra320 SCSI host bus adapter.
Thanks!
Gabriel
1 REPLY
Daniel Kobus_1
Occasional Advisor

Re: Storage System Fan Status Change

Its not hte controller card, its the fan/power supply in you storage shelf that has failed. This needs to be replaced asap so you dont damage the drives!