ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Storage system fan status change

 
Gabriel Bergevin
Occasional Contributor

Storage system fan status change

Hello, I get this error message when I boot the server:
Storage System Fan Status Change.
The COMPAQ PROLIANT 4L2I storage system connected to SCSI bus 1 of the controller in Slot 2 has a new status of 3.
(Fan status values: 1=other, 2=ok, 3=failed, 4=notInstalled, 5=degraded)
[SNMP TRAP: 8026 in CPQSTSYS.MIB]
I check and I don't have a fan on the controller card. I'm using the 64-bit/133MHz dual channel ultra320 SCSI host bus adapter.
Thanks!
Gabriel
2 REPLIES

Re: Storage system fan status change

Hi,

This is generally indicating that a fan on the storage not the card has failed. I would check that all fans in the system are ok.
It could also be an error with the agents reporting the error. It would be worthwhile updating them.

Thanks
Gabriel Bergevin
Occasional Contributor

Re: Storage system fan status change

Hi, I check and all the fan are working properly on the system.... This came when I had the hp64bit/133mhz pcix dual channel ultra 320 host bus adapter... I update the rompaq on the system and it still doing the same thing...