HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Support HP Sims for Netware 6.5 on DL320 with LSI Logic SAS controller

 
Frank_237
Occasional Contributor

Support HP Sims for Netware 6.5 on DL320 with LSI Logic SAS controller

As readable in topicsubject....

Netware is default not supported for the DL320 G4. Eventhough it will work fine. Its installed with SAS disks from HP and a LSI logic SAS raid controller in RAID 1 (Contoller is from the supported hardware list for the 320)

HP sims will install but doesnt seem to be supporting the DL320 with Netware, therefore there is no signal when a harddrive fails. This will make it hard to know when a disk fails....

Is there anyone with the same problem or a solution?