ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Support Pack 7.51 on ML 530 G1 - not working

Jon White
Regular Advisor

Support Pack 7.51 on ML 530 G1 - not working


I have a ML530 G1 that I am attempting to run the Support Pack 7.51 on it. It Extracts fine. However, when the program is run, it does not display the devices installed or the driver versions.

If it has any bearing on this, the 7.50 firmware CD ran fine on this and updated the system bios. It did not update any other devices.
No matter where you go, there you are....
2 REPLIES
Jaime Bolanos Rojas.
Honored Contributor

Re: Support Pack 7.51 on ML 530 G1 - not working

Jon,

Did you configured your SNMP protocol fine, configure the system management homepage, remember that those features need to be configure for all those item to display on the system.

Regards,

jaime.
Work hard when the need comes out.
Oleg Koroz
Honored Contributor

Re: Support Pack 7.51 on ML 530 G1 - not working

Worst scenario run manually
Most important:

System driver
scsi ...
nic ...
agents

ACU utility