ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Swapping DL360G3 disc to a dl380G3 and vis versa

 
Matthew_114
Occasional Contributor

Swapping DL360G3 disc to a dl380G3 and vis versa

I have moved a DL360 disc to a DL380 and a DL380 disc DL360 server al boots up ok. The only problem is when plugin the second HDD so the mirror to proceed and what happens is they the arry controller creates a new array. can anyone he on this issue
2 REPLIES
Oleg Koroz
Honored Contributor

Re: Swapping DL360G3 disc to a dl380G3 and vis versa

Is a drive was created as Mirrored or you used one drive only. Rebuild Process should start automatically for you, if you have one drive only than migrate instead creating additional array, how it was created prior moving?
Terry Hutchings
Honored Contributor

Re: Swapping DL360G3 disc to a dl380G3 and vis versa

What do you mean "so the mirror to proceed"? Did you just move one drive from the original machine over to the other machine? Normally when you do the predure you're describing, you would move the mirror from server #1 to server #2, then power it up.
The truth is out there, but I forgot the URL..