Showing results for 
Search instead for 
Did you mean: 


Ayman Altounji
Valued Contributor


I'm upgrading a Proliant 3000 from Windows NTS 4.0 SP 6 to Windows 2000 with a fresh install. Whenever windows setup begins to start the GUI part of the setup, I get the following error:

Stop: 0x00000D1 (0x00000002, 0x00000005, 0x00000000, 0xF22EA88F)

Address F22EA88F base at F2E8000, Date Stamp 37ed1e74 - symc8xx.sys

If this is the first time....(etc.)

We have the most current BIOS installed.

We're running Dual Pentium II 333s with 768 MB RAM, 2 - 9 GB HD on a 3200 array in mirror.

Any help would be appreciated
Mark Cloutier
Respected Contributor

Re: Symc8xx.sys

The chipset for the embedded SCSI controller is Symbios Logic. Please make sure to skip mass storage detection and use the Compaq CPQ32FS2.sys driver. This should resolve your issue.
Keep me posted please.
We are here for a good time, not a long time!