ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Sysprep of DL360 G4 to DL360 G3 SCSI controller

Terry Hancock
Occasional Contributor

Sysprep of DL360 G4 to DL360 G3 SCSI controller

We are having a problem using ghost and sysprep. We have a good image on the G4 but when we load onto the G3 we cannot boot.
I have put it down to the SCSI controller 6i on G4, 5i on G3. Does anyone know of the right way to ignore or update the controller using sysprep.

Thanks Terry
If no-one saw you break it, deny all knowledge!
2 REPLIES
Martin Forster_1
Frequent Advisor

Re: Sysprep of DL360 G4 to DL360 G3 SCSI controller

i had a issue like while moving a Dl360 G3 Harddisk with OS to Blade BL20G3

The resolution was to patch the registry.
As a hint use this article
http://support.microsoft.com/default.aspx?scid=kb;en-us;314082

and do it in the same manner for the smart array driver,
i first suggest to use the latest supportpack and bios on both controllers.

It worked for me
however this procedure is highly unsupported.

Regards
Martin
Terry Hancock
Occasional Contributor

Re: Sysprep of DL360 G4 to DL360 G3 SCSI controller

I have decided from reading up that there is no ideal answer to this question yet to produce the results that I want. I will swap the G3 Servers for 2 G4 servers. This will make the ghosted servers all G4's

Thanks for your help
If no-one saw you break it, deny all knowledge!