ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Sysprep problem

Ayman Altounji
Valued Contributor

Sysprep problem

I'm trying to create an all-encompassing Sysprep image to use on all of our Compaq servers. I'm using the Sysprep Update (v1.1), and so far the image works flawlessly on most of our servers... DL380, DL380G2, DL580, 6400R. These use the Integrated Smart Array controller, Smart Array-2 controller, Smart Array 5i controller, and Smart Array 5300 controller (not respectively).

I am having an issue with the image not working on an 1850R (Smart Array 3200 controller) and a 1600 (Smart-2SL). After dropping the image on (using Drive Image Pro v5), the system locks up at the end of the status bar "Starting Windows". Attempting to boot to safe mode, the last driver on the screen is MUP.SYS. I have all the drivers for the SCSI controllers on the image, and I'm confident that my SYSPREP.INF file is correct, as it works for other servers/controllers.

What other issues should I be looking at?

Randy Barger
MCT, MCSE, CCNA, CCA, CNA
ConsultIT - Information Technology Consulting
Windows 2000 Migration | Novell | Citrix | Software Sales
http://ConsultIT.bizhosting.com/
1 REPLY
Sunil Jerath
Honored Contributor

Re: Sysprep problem

Hello Randy,
Please try after updating the firmware version of the Array Controllers.

Regards,