HPE Community
ProLiant Servers (ML,DL,SL)
1751830 Members
5136 Online
108782 Solutions
New Discussion

Re: System Partition DL320

 
Ayman Altounji
Valued Contributor

‎06-11-2002 04:00 PM

‎06-11-2002 04:00 PM

System Partition DL320

Cannot boot into system partition with F10 on neither of my DL320s. Is this not a feature of the DL320 (even if the system partition is installed with SmartStart) or how can I do this?
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎06-11-2002 04:00 PM

‎06-11-2002 04:00 PM

Re: System Partition DL320

Hi, in these models the Rom base Setup utility replaces the EISA partition (f10). You basically have all the same in that utility, accessible through the F9 option. After which you have to run the f8 for the ACU. That way you could use the smartstart cd to run diag but when using the smartstart assisted install it will not install a f10 partition since you have the RBSU. Hope this will help.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.