ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

System Partition DL320

Ayman Altounji
Valued Contributor

System Partition DL320

Cannot boot into system partition with F10 on neither of my DL320s. Is this not a feature of the DL320 (even if the system partition is installed with SmartStart) or how can I do this?
1 REPLY
Ayman Altounji
Valued Contributor

Re: System Partition DL320

Hi, in these models the Rom base Setup utility replaces the EISA partition (f10). You basically have all the same in that utility, accessible through the F9 option. After which you have to run the f8 for the ACU. That way you could use the smartstart cd to run diag but when using the smartstart assisted install it will not install a f10 partition since you have the RBSU. Hope this will help.