ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

System ROM via iLO 4 upload.

SOLVED
Go to solution
Eryilmaz
Occasional Visitor

System ROM via iLO 4 upload.

Hi,

We have been happy to work with the server for a long time. But as a result of the fan failure that I experienced yesterday. The system became impractical as a result of a few operations.

I will share the latest status of the server and look forward to your suggestion.

I can not access the system except for iLO 4. only green blinks on the power button.
In the meantime I saw that there was no System and backup ROM on the system. Can I install System ROM with iLO 4? What should I upload attention to when loading?

Server model: DL380p Gen8

Best regards,

Ibrahim

 

5 REPLIES
FabioC1
HPE Pro

Re: System ROM via iLO 4 upload.

Hi  Eryilmaz  

Is possible update BIOS by ILO  4

For last firmware version -> 2018.01.22(2 Mar 2018)

https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5194969&swItemId=MTX_d0e3e008c87848329274eee338&swEnvOid=4184#tab2

You need to do download exe file -cp034953 and extract this file. find the CPQ7013.436

Will be necessary file this file CPQ7013.436 (normally *.flash) to ILO recognize and updae

ILO 4 -> Firmware-> Browse filte ->CPQ7013.436

 

FabioC1 - HPE Pro

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
Eryilmaz
Occasional Visitor

Re: System ROM via iLO 4 upload.

Hi FabioC1,

Thank you for writing. I did this process. But the result is not positive. The files on the ilo 4 screen do not appear. I restart the server the green on the power button continues to flash. I first turn on the orange and then turn on the machine, blinking green.

Regards,

 

FabioC1
HPE Pro

Re: System ROM via iLO 4 upload.

 Eryilmaz  - 

Try to do clear cmos 

Clear CMOS  - https://support.hpe.com/hpsc/doc/public/display?docId=mmr_kc-0103336

Power on system maintence switch 6

 

FabioC1 - HPE Pro

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
Eryilmaz
Occasional Visitor

Re: System ROM via iLO 4 upload.

Hi,

this problem has become the case after doing that process. but I did what you said again. the result is negative.

Regards,

 

Eryilmaz
Occasional Visitor
Solution

Re: System ROM via iLO 4 upload.

Hi,

Sometimes I have to think rather than think very professionally for problem solutions :). First, I removed the battery on the motherboard. In that case I opened the server. Then I turned server off, replaced the battery, and turned it back on. no problem. I'm now reviewing the logs but I have not seen anything so far.

Thanks (https://community.hpe.com/t5/user/viewprofilepage/user-id/1531802)

and (https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/Microserver-Gen8-start-fail/m-p/6498960#M143374)

Good success with HPE.