ProLiant Servers (ML,DL,SL)
1752782 Members
6552 Online
108789 Solutions
New Discussion

System interrupt controller and Base system device drivers

 
AlexandruNae
New Member

System interrupt controller and Base system device drivers

Hi, 

 

I just make a complete restoration of one of my backups (made with built in windows sbs2011 tool) , just for testing... on similar machine. (just the CPU is different (E5-2630 instead of E5-2620).

In Device Manager i have some missing drivers, i tried to install different drives for all components and in the end, i install everything from the HP site, even the firmware's ! Nothing will happened, my missing drivers are still there. (see picture below). Booth machines are DL 380 G8.

I tried everything from google and hp forums, still not showing installed... but the server is working well.

Any idea ???

 

P.S. The primary machine was installed from a ROK Kit with smart start, the backup was restored with an installation disc and i choosed "restore image".

 

 

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: System interrupt controller and Base system device drivers

DL380 Gen8 and smart start?

Consider to run SPP 2014.06 against the system.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
AlexandruNae
New Member

Re: System interrupt controller and Base system device drivers

Torsten, i used HP Smart Update Manager, everything looks fine, but still i have that missing drivers...