HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

T1000 / T1500 - Auto power on UPS after failure

 
Sam_Lees
Frequent Advisor

T1000 / T1500 - Auto power on UPS after failure

Hi All

Our customer reports that an older T1000 UPS does not power on once power is restored and needs to be manually powered on.

Can anyone advise if this is still an issue with the T1000 G3 or any other models. Such as the T1500 G3 (AF451A) ?

Regards
Sam
1 REPLY
Brian Vo
Trusted Contributor

Re: T1000 / T1500 - Auto power on UPS after failure

Hi Sam,

Lots of time, the issue can be resolved by upgrade the UPS FW. Link:
http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/software/hard-firmware.html

Make sure the "old" UPS is T1000 or T1000 G2.
There is no similar problem with G3 models

Brian