cancel
Showing results for 
Search instead for 
Did you mean: 

TCP/IP

 
Ayman Altounji
Valued Contributor

TCP/IP

I have two subnets ( 2 LAN separated by a WAN) and want all users share the same mail server and the DSL internet access.
So I need to configure the TCP/IP adress of the gateway on the NeoServer.
What must I do? I read here it's possible to have direct login access with telnet.
Thanks for help
2 REPLIES
Ayman Altounji
Valued Contributor

Re: TCP/IP

To Pail Y and Robert I
I post again the same message. Have you any solution to enter my CISCO gateway?
(other than " Plan on the neoserver being a sealed box.' It's intended for small offices and simple network configurations. ")
Thanks for your help
Ayman Altounji
Valued Contributor

Re: TCP/IP


The NeoServer is not designed for use in a WAN environment. You can not configure a gateway on the NeoServer. The NeoServer is designed to be used in a single peer-to-peer subnet environment only. See the NeoServer 150 user guide at this web address.

http://www.compaq.com/support/techpubs/installation_guides/153672-001.html