HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

TERMINAL SERVER

 
Ayman Altounji
Valued Contributor

TERMINAL SERVER

What is the proper way of installing Terminal server, since this OS is not an option with the smart start? Do you start with the Terminal server disk and manually load the raid controller drivers?
2 REPLIES
Ayman Altounji
Valued Contributor

Re: TERMINAL SERVER

We gone thru this problem and found out that Install with SS custom and install TS with disks then insert the Array controller disks and then OS, NTSSD & management agents.
Ayman Altounji
Valued Contributor

Re: TERMINAL SERVER

I did not install Terminal Server using the diskettes as you suggested (found this a little after the fact) instead I installed a Smart Array 221 controller to get through the install. After TS was up I ran NTSSD to install the driver for the embedded controller. Then tried bring up the system on that controller. The OS never recognized the drives? So TS would not boot up until I put the 221 controller back in the box. Any suggestions?