ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Target temperature DL360 G7

 
MartinCII
Visitor

Target temperature DL360 G7

Dear support,


I have the problem, that I cannot find a way how to set the target temperature of the server. We are running ESXi 6.0 on it and our server is placed directly in the office.

I think the server is running at max speed the hole time. Our 160 G6 is much more quite and has the same setup but more instances are running on it. The server is definitly not over heating. The air is cold.


Could you please give me some tips how to set the target temperature or configure the server that the fans are running slower?


Thanks

Martin

4 REPLIES
Jimmy Vance
HPE Pro

Re: Target temperature DL360 G7

How are the Power and Thermal settings configured in RBSU?




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
MartinCII
Visitor

Re: Target temperature DL360 G7

Dear support,

 

The strange thing is, that it is not that loud while working in the bios. But directly after ESXi has started.

 

Power Porfile: Custom

Power Regulator: Static Low Power Mode

Power Supply Mode: Balanced Mode

QPI Link Power Mangement: Enabled

Processor idle Powe.. Core: C6 State

Processor idle Powe.. Package: C3 State

Memory Bus: Auto

Memory Interleaving: Full

Dynamic Power Saving Mode: Fast

Collaborative Power Control: Enable

Turo Boost Optimization: Optimized for Power

 

Thanks

Martin

MartinCII
Visitor

Re: Target temperature DL360 G7

Is there a way to set the target temperature of the system?

MartinCII
Visitor

Re: Target temperature DL360 G7

Is there a solution?