ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Teaming Error msg from 2 onborad NICs the same

dereksmobley
Occasional Visitor

Teaming Error msg from 2 onborad NICs the same

DL380 G4
Windows 2003 - recent smartstart 7.40

NICs 7782

The following properties have been disabled for the adapters on team HP network Team #1
Because they are either incompatible or not supported by all adapters on the team
Large send offload

What is the solution?
5 REPLIES
Prashant (I am Back)
Honored Contributor

Re: Teaming Error msg from 2 onborad NICs the same

Hi,

Please remove the driver and re-install the driver for nic from the site and check again. There are some issues for teaming with new PSP. You can also check on forum.

But i suggest REmove the drive and re-install them then team again.

Prashant S.
Nothing is impossible
Oleg Koroz
Honored Contributor

Re: Teaming Error msg from 2 onborad NICs the same



Uninstall team software prior installing new NCU and driver

http://h18023.www1.hp.com/support/files/server/us/locOsCat/69_58.html

Install driver / Uninstall teaming / restart / Install new teaming utility
Andre C Mostert
Occasional Advisor

Re: Teaming Error msg from 2 onborad NICs the same

Try an update the firmware on the server too. Then update with the new version of HP PSP 7.40B. Sometimes on the site you will find that there maybe firmware for the Nic itself.

Good luck
dereksmobley
Occasional Visitor

Re: Teaming Error msg from 2 onborad NICs the same

the solution is to update using softpaqs
Thanks for your help guys
dereksmobley
Occasional Visitor

Re: Teaming Error msg from 2 onborad NICs the same

Thanks Guys,

Solution to reinstall support software.