The Latest Available Firmware Updates Are Not Displayed In Intelligent Provisioning

[emrepolat7]

The Latest Available Firmware Updates Are Not Displayed In Intelligent Provisioning !

Intelligent Provisioning version is 3.40.192.

[Tech_Aniket]

Hello emrepolat7,

Thank you for posting your query.

Based on the IP version, I assume that this is a Gen10 server.

I am not sure what is the current version running on the server.

Please use the User Guide for IP - https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00017037en_us

Page - 28 (Updating firmware)

Note - The Intelligent Provisioning Firmware Update utility reflects the latest updates available in the baseline definedin the latest SPP. Updates that are not in the SPP baseline do not appear on the updates list.

Note - To update firmware, make sure that port 443 is open for SSL communication

Please share the following information -

1. Any Error in Firmware update Page in IP.

2.  Firmware & OS tab in iLO GUI 

Regards,

Aniket Chauhan

[emrepolat7]

Thank you for reply,

I uploaded the image which shows all details.

https://ibb.co/nBz4VC6

I did not pay attention your first note before. is this my case?

[Tech_Aniket · Accepted solution]

Hello emrepolat7,

Thank you for sharing the details.

As per the Screenshot, the Firmware is already running on Latest Versions.

The Intelligent provisioning displays the Firmware version that are a part of SPP baseline. In this particular case, I can see it is following SPP 2019.12 (Content Report - https://downloads.hpe.com/pub/softlib2/software1/publishable-catalog/p384162250/v138522/SPP2019.12.0ContentsReport.pdf)

As per the User Guide shared earlier --> 

Newest firmware available - Updates create versions that you can use to undo an update..

Regards,

Aniket Chauhan