ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Tools to find the Controller Boot Order

 
Piscesp
Occasional Visitor

Tools to find the Controller Boot Order

Anyone knows if there is any utility (command line) to find out the controller SLOT Number boot order in HP. This utility should work in WINPE and should output the controller in SLOT and Boot order. I don't care much about the controller type though. Here is the few I tried

Conrep.exe - With some model I was able to get the controller boot order and but in other few model though conrep runs without an error and output to XML file. The Controller boot order section is missing. It is the same conrep.exe and config file being used.

HPACULI - It is good to get the controller but "hpacucli ctrl all show" doesn't display the controller in boot order and it display even if the controller in SLOT0 is not being used.

HPDiscovery - It requires WMI in WINPE and output differs depending on the server model.Doesn't tell you what SLOT controller is in.

HWDiscovery - Doesn't tell you what SLOT controller is in.

Your help is much appreciated