ProLiant Servers (ML,DL,SL)
1748232 Members
3389 Online
108759 Solutions
New Discussion

Re: Transfer of hard disk to Proliant DL360 G6 server

 
vincentc
Occasional Visitor

Transfer of hard disk to Proliant DL360 G6 server

hi all,

        anyone can advise on this which I'm new to this area to setup and add hard disk to the existing server. Is Proliant HP server DL360 G6 and configured with Raid 1+0 on both drives  C: & D: 1 logical drive are configured with 2 hard disks.

 

        In order to have successful configuration, what are the steps in ACU to configure and ensure the new hard disk are added into the exisiting logical drive? eg. D drive

 

Rgds

 

   

2 REPLIES 2
TVVJ
HPE Pro

Re: Transfer of hard disk to Proliant DL360 G6 server

 

You may refer to the array controller reference guide for more information. Click here to access the guide.

  

You may refer to section “Typical procedures > Expanding an array” on page 61 of the above guide for further assistance.

 

 

 

Regards,

 

Vijayasarathy

I work for HPE
Views expressed herein are my personal opinion and are not the views of HPE

Accept or Kudo

vincentc
Occasional Visitor

Re: Transfer of hard disk to Proliant DL360 G6 server

Thanks Vijay,

                      went through the guide. One thing in mind is that the configuration can be done through using GUI page instead of DOS shell?