HPE Community
ProLiant Servers (ML,DL,SL)
1753770 Members
4920 Online
108799 Solutions
New Discussion юеВ

Trying to add 3rd nic to DL 360 G3

 
Ray Seals
New Member

тАО11-11-2003 06:34 AM

тАО11-11-2003 06:34 AM

Trying to add 3rd nic to DL 360 G3

I'm trying to add a third nic to a DL 360 G3. The BIOS sees the nic but assigns an IRQ that is already being used by something else. In fact, all IRQ's that are an option for me are already used but built in controllers, etc. Is there a way around this?
0 Kudos
Reply
3 REPLIES 3
Frank Kaufman
Honored Contributor

тАО11-11-2003 12:34 PM

тАО11-11-2003 12:34 PM

Re: Trying to add 3rd nic to DL 360 G3

The greatest thing about a PCI bus that cards can share an IRQ.
0 Kudos
Reply
Ray Seals
New Member

тАО11-12-2003 01:01 AM

тАО11-12-2003 01:01 AM

Re: Trying to add 3rd nic to DL 360 G3

OK, but I still cannot get a link light out of this card. This is a known working card because I pulled it from a DL360 G2 machine. The cables are fine because I can switch it to one of the builtin NICS and get a link light.
0 Kudos
Reply
Frank Kaufman
Honored Contributor

тАО11-12-2003 01:11 AM

тАО11-12-2003 01:11 AM

Re: Trying to add 3rd nic to DL 360 G3

Sounds like you do not have the driver loaded for this card
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.