HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Trying to add 3rd nic to DL 360 G3

 
Ray Seals
Occasional Visitor

Trying to add 3rd nic to DL 360 G3

I'm trying to add a third nic to a DL 360 G3. The BIOS sees the nic but assigns an IRQ that is already being used by something else. In fact, all IRQ's that are an option for me are already used but built in controllers, etc. Is there a way around this?
3 REPLIES
Frank Kaufman
Honored Contributor

Re: Trying to add 3rd nic to DL 360 G3

The greatest thing about a PCI bus that cards can share an IRQ.
Ray Seals
Occasional Visitor

Re: Trying to add 3rd nic to DL 360 G3

OK, but I still cannot get a link light out of this card. This is a known working card because I pulled it from a DL360 G2 machine. The cables are fine because I can switch it to one of the builtin NICS and get a link light.
Frank Kaufman
Honored Contributor

Re: Trying to add 3rd nic to DL 360 G3

Sounds like you do not have the driver loaded for this card