ProLiant Servers (ML,DL,SL)
1748201 Members
2934 Online
108759 Solutions
New Discussion

Re: Trying to create a Compaq System Partition (F10 boot) on NON-Compaq SCSI

 
Ayman Altounji
Valued Contributor

Trying to create a Compaq System Partition (F10 boot) on NON-Compaq SCSI

Is is possible to create a Compaq System Partition on a non Compaq SCSI controller in a DL380 (or similar Proliant server)?
1 REPLY 1
Mark Cloutier
Respected Contributor

Re: Trying to create a Compaq System Partition (F10 boot) on NON-Compaq SCSI

unkonwn for certain..but it should work..so long as the partition with your OS is set to the primary afterwards.
We are here for a good time, not a long time!