ProLiant Servers (ML,DL,SL)
1748210 Members
2774 Online
108759 Solutions
New Discussion

Turn on iLO | DL380p Gen8

 
SOLVED
Go to solution
Joseph-IDM
New Member

Turn on iLO | DL380p Gen8

Hello,

 

Using F8 at startup i managed to turn off iLO on HP Proliant DL380p Gen8

Now i need to turn iLO back on

Using F8 it is opening the ROM configuration utility.

Can anyone help me please?

 

Thanks

 

3 REPLIES 3
Jimmy Vance
HPE Pro

Re: Turn on iLO | DL380p Gen8

You will need to remove the cover and set the iLO security disable switch to the on position. The sticker inside the cover will point out the switch

No support by private messages. Please ask the forum! 
Oscar A. Perez
Honored Contributor
Solution

Re: Turn on iLO | DL380p Gen8

Open the hood, look for a label on the back of the hood showing the location of switches.  Flip the switch on the system board called "iLO security override" or something like that.  

 

Power ON the server and wait until the F8 shows up, press it and enable iLO.

 

Once iLO is enabled, flip the switch back to normal position to turn off iLO security override.

 




__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
Joseph-IDM
New Member

Re: Turn on iLO | DL380p Gen8

Thank you...