cancel
Showing results for 
Search instead for 
Did you mean: 

Two CR3500

 
Ayman Altounji
Valued Contributor

Two CR3500

Hello,

I have installed Two CR3500 controllers on the CL1850.
All was working OK untill I have changed the two channels of controller1 to be active,(before controller 1 had Channel0 active and Channel 1 pasive and Controller 2 had Channel0 pasive and channel1 active). After this, the failover mode is High availability and all the options of controller 2 are disabled. How can I get back to the initial situation, so to a failover mode high perfomance?.
In this situation I had taken out the controller1 and the second one had not taken the controll, it had the orange led active...
About this, wich is the best way to work, with High availability or with high performance?.

Thanks very much in advance,

Guillem