USB 2.0 and Proliant G3

[Michael Sole_1]

I am working on a solution that involves Ghost, and a USB DVD drive. I have it working using USB 1.1 OHCI Spec drivers. USB 2.0 is much faster and would like to see how fast I can get it.

According to the information I have found on HP website it says that the USB hardware is 2.0 compatible but I can not seem to get it to work.

The instructions say I need to disable legacy mode. I do not know how to do this.

Please help!

[Marko H.]

To disable legacy USB support on all servers that ship prior to 2004, complete USB functionality must be disabled by disabling the USB Host Controller in RBSU under PCI Devices.

More info. under:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html