ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

USB card in a Proliant 6500

Mark Wiley_1
Occasional Visitor

USB card in a Proliant 6500

Hi all! Looking for a little help here. Does anyone know if you can put a Belkin USB 2 PCI card in a Proliant 6500? If so, how do I get the server to recognize it. I've tried different slots. I noticed that the power to the slot won't come on so I'm guessing that the server isn't seeing it for whatever reason. Any help I can get would be greatly appreciated and make life much easier. Thanks
3 REPLIES
Prashant (I am Back)
Honored Contributor

Re: USB card in a Proliant 6500

Hi

What is the Information rgarding the card

1 Shared PCI / ISA 32-bit / 33MHz PCI PCI Bus 2 Available
2 PCI 64-bit / 33MHz PCI hot-plug PCI Bus 2 NIC
3 PCI 64-bit / 33MHz PCI hot-plug PCI Bus 2 Available
4 PCI 64-bit / 33MHz PCI hot-plug PCI Bus 2 Available
5 PCI 64-bit / 33MHz PCI hot-plug PCI Bus 1 Available
6 PCI 64-bit / 33MHz PCI hot-plug PCI Bus 1 Availab

Where no usb card are supported by compaq server
Nothing is impossible
Sunil Jerath
Honored Contributor

Re: USB card in a Proliant 6500

Hello Mark,
After installing the USB card did you run System configuration utility?? If not then here is the link:

http://h18000.www1.hp.com/support/files/server/us/download/13227.html

Regards,
Mark Wiley_1
Occasional Visitor

Re: USB card in a Proliant 6500

Thanks for the reply's. Got it figured out this morning. I found out there was a 32-bit slot but had to take the cover off to get to it. Once I put that in the 32 bit it recognized it. Thanks