ProLiant Servers (ML,DL,SL)

Unable to access b120i interface

Occasional Contributor

Unable to access b120i interface

HP ProLiant ML310e Gen8 v2 Performance - Server - tower - 4U

B120i raid card

On the hp logo screen where everything is initializing, i press f5 when it brings up the raid info.

This takes me to another screen.
When it says to press f5 to go to the raid interface, it acknowledges that i pressed f5 and says it will automatically go there.

Then the next screen is the windows logo and boots into windows.

What can i do to get into my raid card?
Acclaimed Contributor

Re: Unable to access b120i interface

Check if you have the latest ILO firmware. Update to 2.73 if needed. Is everything healthy?
You maybe hitted by the NAND issue, si Intelligent provisioning is not available.

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!