HPE Community
ProLiant Servers (ML,DL,SL)
1753420 Members
4815 Online
108793 Solutions
New Discussion

Re: Unable to access b120i interface

 
proliantreliant
Occasional Contributor

‎06-19-2020 11:11 AM

‎06-19-2020 11:11 AM

Unable to access b120i interface

HP ProLiant ML310e Gen8 v2 Performance - Server - tower - 4U

B120i raid card

On the hp logo screen where everything is initializing, i press f5 when it brings up the raid info.

This takes me to another screen.
When it says to press f5 to go to the raid interface, it acknowledges that i pressed f5 and says it will automatically go there.

Then the next screen is the windows logo and boots into windows.

What can i do to get into my raid card?
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎06-19-2020 03:13 PM

‎06-19-2020 03:13 PM

Re: Unable to access b120i interface

Check if you have the latest ILO firmware. Update to 2.73 if needed. Is everything healthy?
You maybe hitted by the NAND issue, si Intelligent provisioning is not available.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.