ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to boot from floppy or CD-ROM

 
Ayman Altounji
Valued Contributor

Unable to boot from floppy or CD-ROM

After applying all the latest applicable ROMPaqs and reapplying Service Pack 6A, I was going to boot from a ROMPaq created floppy and the system went past the floppy detection right into the OS startup. I verified the floppy boot enabled configuration in the BIOS and that the controller board switch number 4 is off. The same symptoms occur with the CD-ROM. Both devices are available within Windows.

Any thoughts as to the next troubleshooting step?
1 REPLY
Ayman Altounji
Valued Contributor

Re: Unable to boot from floppy or CD-ROM

Is your flux capacitor fluxing?