ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to configure RAID for H220 SAS 2 Controller in a HP Proliant ML310e G8v2

 
herzogp
Occasional Visitor

Unable to configure RAID for H220 SAS 2 Controller in a HP Proliant ML310e G8v2

I am setting a brand new HP Proliant ML310e G8v2 server with an additional HP H220 SAS 2 PCI Controller that has 4 HP 450Gb 6G (652615-B21) 6G SAS 15K rpm LFF hard drives.

 

The BIOS is configured for SATA AHCI Support in "System Options/SATA Contr Option/Embedded SATA Config". The Boot Controller Order is configured to boot first from the H220 Host Bus Adapter and the second from the Embedded Intell SATA Controller.

 

The H220 Host Bus Adapter MPT Firmware Rev is 13.10.53.00-IT, NVDATA Ver OD.43.00.12

 

The BIOS Boot-up sequence displays the HP H220 adapter and the 4 HDs attached.

 

There appears not to be any option in the LSI SAS Configuration Utility or HP Intelligent Provisioning tool 

to configure the HDs for RAID.

 

How can I configure RAID on this adapter?

 

1 REPLY
Cederberg
Honored Contributor

Re: Unable to configure RAID for H220 SAS 2 Controller in a HP Proliant ML310e G8v2

Hi.

 

The HP H220 controller is only a Host bus adapter and doesn't support any type of hardware RAID.

 

http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111197