ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to detect any hardware component on ML 110 G5 ?

 
SOLVED
Go to solution
Server-Support
Super Advisor

Unable to detect any hardware component on ML 110 G5 ?

People,

 

I'm currently having problem and facing difficulties in rebuilding HP ML 110 G5 server with WIndows Server 2012 R2 OS:

 

1. Using the most updated HP SPP 2014.09, I cannot perform the firmware update both Interactive and Automatic.

2. Using the HP Smart Start v 8.70b I cannot select the Windows Server 2012 R2 OS from the OS selection, hence I managed to manually install Windows Server 2012 R2.

 

But somehow I cannot Seem to detect:

 

1. The RAID-1 that was created on using the board SATA controller.

Adaptec.jpg

 

2. HP System Management Homepage unable to detect any of the hardware components ?

 

SMH.jpg

 

So can anyone please share what is the trick to make HP agent and WBEM providers working under Windows Server 2012 R2 OS ?

 

THe server is still working good with no problem.

Best regards
4 REPLIES 4
Suman_1978
HPE Pro
Solution

Re: Unable to detect any hardware component on ML 110 G5 ?

Hello,

 

Please refer to the server's compatibility with OS, SPP, CD, Firmware before updating.

 

ML110 G5 does not support Windows 2012.

This server supports Windows 2008.

http://h17007.www1.hp.com/us/en/enterprise/servers/supportmatrix/windows.aspx

 

HP Service Pack for ProLiant (SPP) Version 2014.09.0 (This release no longer supports ProLiant G5 and earlier platforms).

http://h17007.www1.hp.com/us/en/enterprise/servers/solutions/info-library/index.aspx?cat=smartupdate&subcat=hp_spp

 

HP SmartStart CD is not supported on 100 series servers.

 

ML110 G5 supports Easy Set-Up CD.  Click here.

 

 

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers

 

Accept or Kudo

Server-Support
Super Advisor

Re: Unable to detect any hardware component on ML 110 G5 ?

Suman,

 

So in this case, There is no other way to run Windows Server 2012 R2 or any Windows version later than 2008 R2 ?

 

I guess, my only options is just to install Windows Server 2008 R2 with the Smart Start CD.

Best regards
Suman_1978
HPE Pro

Re: Unable to detect any hardware component on ML 110 G5 ?

Hello,

 

Customer is free to install any OS they want on their server but it will not be supported by HP.

There may not be any drivers for that OS+your server.

 

Thank You!
I am a HP employee.

Useful Links for ProLiant Servers

Accept or Kudo

Server-Support
Super Advisor

Re: Unable to detect any hardware component on ML 110 G5 ?

Thanks Suman.

Best regards