HPE Community
ProLiant Servers (ML,DL,SL)
1752679 Members
5363 Online
108789 Solutions
New Discussion

Unable to enter RBSU. No F9 prompt showing

 
Kieran Moran
Occasional Contributor

‎09-26-2004 11:48 PM

‎09-26-2004 11:48 PM

Unable to enter RBSU. No F9 prompt showing

We have three DL380 servers, RBSU version somewhere in 2001. No F9 prompt shows when we reboot the machines, only F8 & F10 for iLO and disk utilities. Is there an on-board switch or something else we have unwittingly switched off? This is quite urgent so any help very much appreciated.

Thanks in advance,

Kieran
0 Kudos
Reply
1 REPLY 1
JohnWRuffo
Honored Contributor

‎09-27-2004 12:19 AM

‎09-27-2004 12:19 AM

Re: Unable to enter RBSU. No F9 prompt showing

Kieran:
Are these Generation 1 DL380's?

If so, they do not have an RBSU. They likely have a System Partition (Press F10) and you can use the System Configuration Utility to configure the server. If you need to change advanced features from within the SCU, just press A.

If you press F10 and the system comes back stating no system partiton found, then the server was not built with one.

You can use the SCU from your SmartStart CD or from the diskette version, here:
http://h18000.www1.hp.com/support/files/server/us/download/13227.html

Hope this helps! -john
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.