ProLiant Servers (ML,DL,SL)
1745917 Members
4232 Online
108723 Solutions
New Discussion

Unable to fix bmc 601 error [ML150G6]

 
alexmeteenserve
Occasional Collector

Unable to fix bmc 601 error [ML150G6]

Hello All,

 

As the title suggest I have a BMC 601 error on my HP Proliant ML150G6, and I've been unable to fix it thus far.

A post suggested that I need to flash the lights out software to fix this, but I can't find anywhere to download this or how to flash it. I've inserted an ethernet jack in both the ports and I read somewhere I should set the IP to static in my bios > advanced > ipmi, but all ip related options there are greyed out.

I have installed an E5540 with 2x4GB and a 250GB harddisk with Windows Server 2008 R2.

I hope I haven't left out anything but feel free to ask otherwise.

5 REPLIES 5
krasinka1409
HPE Pro

Re: Unable to fix bmc 601 error [ML150G6]

Hi , 

 

you may try to reser the BMC Controller (iLO) using the BMC Reset/Recovery Jumpers, see Maintenance Guide:

 

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01706108-8.pdf

 

Afterward, try to install the BMC Firmware, available here:

 

https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=3884326&swItemId=MTX_f35f114acda543568e47f527ca&swEnvOid=4184#tab1

Thank you
I am an HPE Employee
alexmeteenserve
Occasional Collector

Re: Unable to fix bmc 601 error [ML150G6]

I tried it, but it says the hardware is not found. I've attached a screenshot.

alexmeteenserve
Occasional Collector

Re: Unable to fix bmc 601 error [ML150G6]

But when I switch the jumper to recovery mode and try to install it looks like it works, says it could take up to 10 minutes and is done in a second.

COSgizycko
Occasional Visitor

Re: Unable to fix bmc 601 error [ML150G6]

the same problem after add secound CPU  any 

update bios reset bios 

update bmc 

any solution ?

COSgizycko
Occasional Visitor

Re: Unable to fix bmc 601 error [ML150G6]

when try to update another time when boot program I press cancel becouse bmc version is up of date .

When serwer up upgrade bmc finished menu up 

And fixit 

4 try bmc reinstall on bmc recovery mode or not              end succes