ProLiant Servers (ML,DL,SL)
1748137 Members
3491 Online
108758 Solutions
New Discussion

Unable to restart DL380 Gen10 via intelligent provisioning

 
SOLVED
Go to solution
Ana_C
Occasional Visitor

Unable to restart DL380 Gen10 via intelligent provisioning

Hi!  I have a hp DL380 Gen10 server:
- through the intelligence provisioning platform an Array was configured
- Later I tried to restart the server but it shows a box with the message:
"The property [action] is a required property and must be included in the request if the operation did not complete, verify the property is in request body and has a valid value"

the firmware version is: 3.30.213

BMC: iLO 5v2.14

 If someone could help me with this problem, I would really appreciate it.

2 REPLIES 2
support_s
System Recommended
Solution

Query: Unable to restart DL380 Gen10 via intelligent provisioning

System recommended content:

1. Re-enabling Intelligent Provisioning

2. Intelligent Provisioning

 

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

 

Thank you for being a HPE community member.


Accept or Kudo

Torsten.
Acclaimed Contributor

Re: Query: Unable to restart DL380 Gen10 via intelligent provisioning

Consider to update:

 

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_ca7d56ce4be149b1b4754b15f6


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!