ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to see local volume when we are installing redhat 6.5 customize on Proliant DL360 Gen9

 
SONNYBU
Occasional Visitor

Unable to see local volume when we are installing redhat 6.5 customize on Proliant DL360 Gen9

Hi everybody;

I'm facing an issue of installing Redhat 6.5 customize by Ericsson for there application.

So I have already create raid on a server proprerly and when I reboot the server the dvd of installation start and when the wizard of installation reach the place to select local hard disk, I cannot see the local disk, It looks like a problem of driver, I upgraded firmware and drivers with HPE SPP but I'm still facing the same issue

Can someone can help me to resolve the issue please

1 REPLY
Jimmy Vance
HPE Pro

Re: Unable to see local volume when we are installing redhat 6.5 customize on Proliant DL360 Gen9

According to the Minimum Operating System Requirements page, RHEL 6.5 requires an updated driver if you are using a Smart Array "P" or "H" series controller.

http://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/exceptions/rhel_exceptions.aspx

The updated driver is listed on the support site after searching on your server model and seleting the OS

http://h20565.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=7252838&swItemId=MTX_4ca26ac4aa224957ae2a36754a&swEnvOid=4103

For the "B" series controller this driver is required

http://h20565.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=7252838&swItemId=MTX_d1d18b11b0664e6f9f8da14aaa&swEnvOid=4103

Even though a driver is available for the "B" series controller,  best practices call for setting this controller to SATA mode and use the software RAID included with the OS
http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c05316102

 

 

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!