Unknown device - Proliant DL380-G5 Win2k3

[Scooty]

I have seen a previous post about unknown devices and I have installed the latest Smartstart and Support packs (7.90a) without any joy
My system is showing an unknow device. It is showing as a PCI standard ISA bridge device on I/O 0CA2-0CA3
If anyone can tell me what it is or what driver I need to use it would be most appreciated

[James ~ Happy Dude]

Hello,

Did you upgrade the Firmware ?
Use Firmware maintenace cd 7.9

Regards,
James.

[Scooty]

Yep latest firmware is in use
I downloaded this and applied it
Tried uninstalling and doing Scan for Hardware changes, still can't determine what it is!

[James ~ Happy Dude]

Try Deleting it & then scanning for Hardware changes !!

James.

[James ~ Happy Dude]

Was the System Board Changed ???

Refer:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00783741

James.

[KarloChacon]

hi

check James link.

also let me ask you W2003 SP1 or SP2?

try downloading PSP 7.7, unistall everything on Add/Remove programs that's is related with HP (any utility) and install PSP 7.7

regards

[Scooty]

I ended up specifying a manual driver install, selected Standard system devices then the generic PCI standard ISA bridge driver
Seems to have taken and appears al OK in the Device Manager as a result

Thanks for the responses
BTW, it is Win2k3 EE Sp2 (R2)
No system board changes had taken place it was a brand new machine with a brand new O/S install

[KarloChacon]

je nice solution

regards

[James ~ Happy Dude]

I see;

Refer:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00751525

That advisory is for 100 series servers;
You may want to install the same controller for DL380 G5 from :
http://h18023.www1.hp.com/support/files/server/us/download/26986.html

This should get this FIXED !

Regards,
James.