ProLiant Servers (ML,DL,SL)
1745846 Members
4423 Online
108723 Solutions
New Discussion юеВ

Re: Unrecoverable System Error Error code 0x0000002D

 
cevers
New Member

Re: Unrecoverable System Error Error code 0x0000002D

We are experiencing the same issues on a Proliant DL380 G5.
We've had the system board and p400 controller replaced, which made no difference. Before having these parts replaced we were seeing the server fail about every third day, however now we are lucky to see it stay up for more than a couple of hours.
Has anyone had any progress with this fault?
GScala
Advisor

Re: Unrecoverable System Error Error code 0x0000002D

I have not made any progress here.
TarunJain
Respected Contributor

Re: Unrecoverable System Error Error code 0x0000002D

Hi,
It should be a hardware failure for sure.
You must have tried some of following steps but just in case you haven't.

1. Have you tried checking system on minimum configuration?
2. Which PCI-e and PCI-X devices are installed in this server? Try removing them.
3. Disable the ASR (for testing only)
4. RUN offline diagnostics via Smart Start CD.
## Offline diagnostics will take more than hour depending on the loops and number of hard drives, This will check all the hardware components. It is also helpful to determine if the issue could be reproduced without OS

I am an HPE Employee

Accept or Kudo
src="/html/assets/hpe_banner_SME_signature.p ng">

syati
Occasional Contributor

Re: Unrecoverable System Error Error code 0x0000002D

Hi,

Is there any soluiton for this? I facing the same issue. Can anyone help?

 

Thank you.

Torsten.
Acclaimed Contributor

Re: Unrecoverable System Error Error code 0x0000002D

May depend on the server model:

http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c02662362&sp4ts.oid=1121516


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!