Since the link for esxi is not available there is a workaround you can perform. Create a custom SPP and include the component from either redhat or windows. Once created run the custom SPP on the server in offline mode since in offline mode OS will nto matter and then you can proceed to either automatic or interactively only update the PSU component.
If you feel this was helpful please click the KUDOS! Thumbs below!
I am an HPE employee
I am an HPE employee
I made the custom SPP but it cant start:
I found at SUM's help that SUM cant deploy rpm on vmware nodes:
@BunsolHave you ever performed the PS's firmware update on ESXi?
Offline mode means boot from this SPP, either virtual media or USB.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!