HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Urgent! ML310 G5 diagnostic utility on boot


Urgent! ML310 G5 diagnostic utility on boot

I don't know what option i have changed on setup but know when system boots it shows diagnostic utility with memory test, boot test, etc and do not works anything (mouse,keyboard).
System now doesn't shows press F9 for setup.
Any idea what happen and how i can solve this ?
Gary Benavides Meza
Trusted Contributor

Re: Urgent! ML310 G5 diagnostic utility on boot

Make sure you don't have anything in the server, CDs, External devices USBs, flash cards. Try to clear the NVRAM that will set the BIOS to the default settings. You can do it by locating the system maintenance switch and set the switch number 1 and 6 to the on position. Or simply remove the CMOS battery 40 seconds and then put it back.