Community
ProLiant Servers (ML,DL,SL)

Usb disabled

 
dennaus
Occasional Contributor

‎09-06-2017 07:51 AM - edited ‎09-07-2017 03:57 AM

‎09-06-2017 07:51 AM - edited ‎09-07-2017 03:57 AM

Usb disabled

 Hi,

like a stupid I have  accidentally disabled USB in bios following a workaround to fix a problem.

Is there any way I can re-enable the USB or reset to factory settings remotely?

Its important to not lose te raid setting!

Server HP ProLiant DL380e Gen8 - Windows server 2012 standard

Thanks in advance.

0 Kudos
Reply
2 REPLIES 2
dennaus
Occasional Contributor

‎09-07-2017 06:08 AM

‎09-07-2017 06:08 AM

Re: Usb disabled

This solution is relevant for my server? For not losing raid setting,

I found this for a proliant ml110 g7

Re: ML110 G7 problem with boot USB mouse and keyboard
  1. Open case and turn switch nº 6 in ON
  2. Turn Proliant and wait to any message
  3. Turn Proliant off and change by OFF maintenance nº6 switch
0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎09-07-2017 06:42 AM

‎09-07-2017 06:42 AM

Re: Usb disabled

Once I did the same - with USB disabled you can no longer work with mouse and keyboard.

The S6 maintenance switch will reset the BIOS to default values, all RAID information is stored on the disks, so this configuration will remain.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.