ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Using Dual Processor.

 
Ayman Altounji
Valued Contributor

Using Dual Processor.

We are using a Proliant 800 Server with Windows 2000.
It's installed with 2 450 MHZ proc.
In windows it's saying that (control panel / hardware tab / device management) it's a Standard PC. Now I wanna use those 2 proc. Wich driver can I use?
1 REPLY
Mark Cloutier
Respected Contributor

Re: Using Dual Processor.

Go into Device Manager and under COMPUTER...If it says Uniprocessor then go to the DRIVER TAB and then choose UPDATE DRIVER, next....next....please make sure you choose the correct one. IF it says ACPI then use the same. If it says MPS then choose that one..
Go into the F10 partition and at the first window type CTRL A a dialogue box should appear asking about ADVANCED MODE. Hit ENTER. Choose SYSTEM CONFIG -> Config HW -> Review and Modify -> View and Edit Details. Hit PAGE DOWN twice and there you will see ADVANCED FEATURES. You will then see APIC MODE . Change that to Full table and then save and exit. Please keep me posted.
We are here for a good time, not a long time!