Using SAWK1000S5xnN7.2 in ProLiant DL360 G7

[ThomasSan]

Hi, 

I'm trying to get my new HDD's to work but they do not show up and the led light on the tray's are red.
Is there a way to get these disks to work?

P410i is on the latest FW version. 
The old drives work fine.

[Bunsol]

Hi Thomas,

Good Day. As per the information shared request you to check if the drive you have purchased is listed in the quickspecs of the server:-

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04284501

Please also refer to the quickspecs of the controller to check if the drive is supported and the capacity of drive supported:-

https://h20195.www2.hpe.com/v2/getpdf.aspx/c04111713.pdf

If drives are compatible then please raise a case with us using the below link:-

https://support.hpe.com/hpesc/public/home

Regards,

Bunsol

[ThomasSan]

Hi Bunsol, 

Thanks for your reply.

The hdd in question is not listed in either quickspec I'm afraid.

Regards

Thomas

---