ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Using SAWK1000S5xnN7.2 in ProLiant DL360 G7

 
ThomasSan
Occasional Visitor

Using SAWK1000S5xnN7.2 in ProLiant DL360 G7

Hi, 

I'm trying to get my new HDD's to work but they do not show up and the led light on the tray's are red.
Is there a way to get these disks to work?

P410i is on the latest FW version. 
The old drives work fine.

 

2 REPLIES 2
Bunsol
HPE Pro

Re: Using SAWK1000S5xnN7.2 in ProLiant DL360 G7

Hi Thomas,

 

Good Day. As per the information shared request you to check if the drive you have purchased is listed in the quickspecs of the server:-

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04284501

Please also refer to the quickspecs of the controller to check if the drive is supported and the capacity of drive supported:-

https://h20195.www2.hpe.com/v2/getpdf.aspx/c04111713.pdf

 

If drives are compatible then please raise a case with us using the below link:-

https://support.hpe.com/hpesc/public/home

 

Regards,

Bunsol

Accept or Kudo
ThomasSan
Occasional Visitor

Re: Using SAWK1000S5xnN7.2 in ProLiant DL360 G7

Hi Bunsol, 

Thanks for your reply.

The hdd in question is not listed in either quickspec I'm afraid.

 

Regards

Thomas