ProLiant Servers (ML,DL,SL)
1748195 Members
4413 Online
108759 Solutions
New Discussion юеВ

Re: VLAN issue with latest NIC Driver

 
SOLVED
Go to solution
James ~ Happy Dude
Honored Contributor

Re: VLAN issue with latest NIC Driver

Hello Carlos,

TOE is not just or teamed NICs.
Please refer my Previous posts(above) for the Command to disable it.

Also, Did u update the Firmwares ?

Using an OLD NCU "may" resolve it .. "may not"

Regards,
James.
Technology Helpdesk
Occasional Advisor

Re: VLAN issue with latest NIC Driver

FYI...The old NCU will not work with the current driver. Actually it won't even open up because it complains about the NIC driver being out of date.
Carlos Hernandez Barea
Occasional Advisor

Re: VLAN issue with latest NIC Driver

Hello again.

When I execute the command

netsh int ip set chimney DISABLE

I get "The following command was not found" error....
James ~ Happy Dude
Honored Contributor

Re: VLAN issue with latest NIC Driver

Did u try "netsh int ip set chimney DISABLED" ??
Carlos Hernandez Barea
Occasional Advisor

Re: VLAN issue with latest NIC Driver

Yes.

It was a typo...
Carlos Hernandez Barea
Occasional Advisor

Re: VLAN issue with latest NIC Driver

I mean, I tried both, "disable" & "disabled".
Carlos Hernandez Barea
Occasional Advisor

Re: VLAN issue with latest NIC Driver

Hello.

After downgrading the driver and the NCU, I cannot open NCU because "the virtual miniport (teaming) driver installed", needs NCU 8.70 minimum.

Do you know how to downgrade this driver. Downgrading the Proliant Support Pack did not work either.

Combinations of Driver and NCU that do not lose the MAC Address for the VLAN are:

- Driver 9.81 + NCU 8.15
- Driver 8.52 + NCU 8.15

Regards.
Massimiliano Fiorazzo
Occasional Advisor

Re: VLAN issue with latest NIC Driver

DL380 G4

Windows Standard 2003 X64

Is there a STABLE combination of NCU and NIC drivers ?????
I always have a random VLAN with mac-address 00-00-00-00-00-00.......

thank you

max
Jan Brugman
New Member

Re: VLAN issue with latest NIC Driver

L.S.

We had the same problem: one Virtual adapter (we have 20) got the MAC Physical Address: 00-00-00-00-00-00 after a reboot. This problem occurs always after a reboot.
disable/enable solved it till next reboot.

We solved the problem to remove all the Virtual and Physical Adapter, boot the server and reconfigure all adapters again (also teaming enabled).
Till now we did'nt see the problem (one day, several restarts) anymore.
but...

Massimiliano Fiorazzo
Occasional Advisor

Re: VLAN issue with latest NIC Driver

hi Jan,
i'm glad to see that i'm not alone !

;)

i've heard from HP italy that this is a known issue that will be solved (we hope...) with the next Network Config Utility..... they suggested to use NCU 8.55 instead of 8.60 but i have not tried yet.....

i will try the solution suggested by you....

thank you